The development of solar photovoltaic mount manufacturers needs to improve the quality of the racks
The development of solar photovoltaic mount manufacturers needs to improve the quality of the racks
The products of solar photovoltaic stents can be divided into ground solar photovoltaic Mount system, flat roof solar photovoltaic stent system, inclined roof direct system, column solar photovoltaic stent system, and angle-adjustable roof solar photovoltaic stent system. The solar photovoltaic support developed today is a special support designed for placing, installing and fixing solar panels in the solar photovoltaic support power generation system.
As the country pays more and more attention to environmental issues, it is believed that not only solar photovoltaic stents, but more solar products will be widely used in people's lives. It can be said that the future of solar photovoltaic stents is very bright.
The performance of the solar photovoltaic support is very stable, the production property is considered familiar, the installation is convenient, there is no welding, no drilling, and 100% can be reused.
Solar photovoltaic stent companies have adopted advanced automated equipment to produce solar photovoltaic stents, as well as refined management, continuous upgrades in technology, and the quality of solar photovoltaic stents. The cost of products is reduced through technological progress, and more energy is devoted to the development of the domestic solar photovoltaic stent market in terms of market strategy. In terms of national development trends, solar photovoltaic stents will achieve considerable development.
Cold bending is an important process in the processing of c-shaped steel. Although it is said that there will be a correction process after cold bending, the c-shaped steel produced in my country is still deformed seriously after being placed for a period of time. This affirms that c-shaped steel has a large internal The existence of stress at the same time affirms that our country has not been able to solve the problem of internal stress of c-shaped steel so far. The stamping performance of C-shaped steel is not very good, and the rebound is very large after buckling. This problem also needs to be solved urgently.
There is still a big gap between my country's c-beam production technology and foreign comparisons. The most urgent task is to improve the production technology of my country's c-beam construction process, and step up the development of relevant industry standards and test standards. C-beam manufacturers should maintain with truck manufacturers. Keep in close contact and communicate more. This way, it will be more beneficial for c-shaped steel manufacturers to produce c-shaped steel products suitable for the truck industry.
