Angle Adjustable Solar energy Mounting Systems
- Starwin
- China
- 14days
- 30MW per month
Adjustable aluminum Solar energy ground mounting systems
A ground-mounted solar power system is just what it sounds like - a system of solar panels that are mounted on the ground
solar racking manufacturer made in china
adjustable angle Aluminum Ground System is made of 100% aluminum for mounting on concrete foundations or ground screw. It is light and strong, graceful and smart.
In our adjustable angle Aluminum Ground System, Not only the east-west direction can be adjusted, the column is also designed for adjustable,the tilt angle can be adjusted between 15 degree,and the Beam is pre-assembled, the size of the leg and the Rail is plan and machined on factory to eliminate the weld and cut on installation site to save your install time and cost.
Adjustable Angle:
0-30degree. east west or north and south direction adjuatable
solar racking manufacturer made in china
Installation Site: Open field
Wind Load: Up to 60m/s
Snow Load: Up to 1.4KN/m
Applicable Module: Framed or Frameless
Module Orientation: Vertical or horizontal
Main Material: 100% Anodized Aluminum AL6005-T5
Fastener Material: Stainless Steel
Parts have been high pre-assembly on factory to save your installation time.
● Safety and Reliability
Check and test the structure strictly to against the extreme weather condition.
● Flexibility and Adjustable
Smart design reduce the difficulty of the installation on the most condition.
● 10-Year Warranty
Starwin Solar provides a 10-years warranty for the material and structure.
What is a ground-mounted solar panel system?
A ground-mounted solar power system is just what it sounds like - a system of solar panels that are mounted on the ground on your property, rather than on the roof of your house.
Ground-mounted solar panels can be installed any place on your property that has sufficient open space and good sun exposure. The panels can be placed anywhere from a few inches to a few feet off the ground, depending on how the racking system is set up. The panels feed power to a solar inverter, which is located either on the mounting system behind the panels or in the house.
Residential ground-mount solar installations are generally built using 60-cell solar panels - the same solar panel size typically used in residential rooftop solar installations. Meanwhile, larger-scale ground-mounted systems, like ones used in solar farms, tend to use larger, 72-cell solar panels.
Ground-mounted solar panels are also known as backyard solar panels, free-standing solar panels, and ground-mount PV systems.
solar ground mount manufacturers in China
Ground mounting installation guide
Standard ground mount
Standard or traditional ground mounts use ground anchors to hold up a racking table that supports the solar panels on rails. The exact method of anchoring will depend on your ground conditions: using concrete piers is most common, but driven piers, helical piles, and concrete ballasts are options, as well.
Standard ground mount systems typically hold the solar array in a fixed position, although options for manual adjustment are gaining popularity.
The standard ground-mount system is the easiest and most cost-effective solution for a ground install, and also the most common.
Pole mount
To build a pole-mount solar system, you dig one big hole into the ground, instead of several smaller holes as with a standard ground-mount. A large pole is set into the ground, upon which you connect your rails and mount your solar panels.
Pole-mount systems offer greater clearance from the ground, which is useful in avoiding foliage or other ground obstructions, and can even be used to provide space and shelter for animals to graze underneath. Another advantage of pole mounts is that they can easily incorporate a single-axis or dual-axis tracking system; these enable the panels to follow the sun over the course of the day and thus produce more energy.
On the flipside, pole mounts with tracking systems have a higher cost per watt, and most people find it cheaper to instead install a standard ground-mount array with more solar panels.
solar angle adjustable ground mounting details
solar mounting structure design infomation
Requirements to design and quote
1) solar panel datasheet (L x W x T)
2) planed layout: ___row X ___nos modules
3) tile angle
4) roof type: metal or tile or concrete
5) orientation of solar panel: portrait or landscape
6) wind load and snow load
Why Choose US
· Design conformable to different on-roof project requirements
· Fast and cost effective installation, easy to be assembled on different roof tops
· Short in 7 days leading time
· Wisely solutions for your solar PV projects
FAQ
Q : Can I have a sample order ?
A : Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q : What about the lead time?
A : Sample needs 3-5 days, mass production time needs 10~20 days for order quantity more than.
Q : Do you have any MOQ limit ?
A : For normal products,we provide low MOQ, 1pc for sample checking is available.
Q : How do you ship the goods and how long does it take to arrive?
A : For small products,we usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-7 days to arrive. For big orders,we usually ship by sea,it will take 7~30days to arrive, depend on distance.
Q : How to proceed an orders?
A : Firstly let us know your requirements or application.Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order.
Q : Is it OK to print my logo on products?
A : Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q : Do you offer guarantee for the products?
A : Yes, we offer 10 years to solar mounting system.